At Scopes n’ More, we stock a great selection of
Weaver Style Rings by Burris and Millett. These are all sharp-looking, top-quality
products. And, with our full selection of sizes and finishes, you'll find the right
weaver rings for your application. If you don't have scope bases yet, be sure to
check out our Weaver Scope Bases,
arranged by firearm make and model. If you're looking for a different style of rings
or bases, send the part number by email. We'll be glad to check the price and
availability for you. Weaver scope rings ship for just $2 per set, but are subject
to a shipping minimum when purchased alone.
Burris Zee rings have long been
favorites of custom gunmakers because of their strength, beauty and fit. It's easy
to recognize Burris' innovative designs and rock-solid performance. Each ring is made from
a solid piece of steel with the top and bottom half perfectly mated. Zee rings (with
no moving parts) are the best fitting and most positive gripping Weaver-style ring made.
|
 |
 |
Burris Signature rings are for the
shooter who demands the best performance from his equipment. By putting a synthetic
pivoting insert within a steel outer ring, your scope-to-ring surface area contact becomes
virtually 100%. These rings provide consistent accuracy, tighter grip, and scratch
and stress free mounting.
|
The Millett Angle-Loc windage
adjustable scope mount is the most significant improvement to the traditional Weaver-Style
mount in many years. All components are made of heat treated nickel steel for rock
solid durability. Windage adjustment in the rings means your scope will be perfectly
aligned before you sight it, so you'll always have the maximum exit pupil available.
|
 |
Choosing Ring Height by AOD: Objective Diameter, action length, and barrel taper all come into
play when choosing the correct ring height to use. The tables below are marked with
general guidelines for selecting the appropriate ring height based on your Adjusted Objective Diameter, or AOD.
The AOD is your scope's stated objective diameter, adjusted by any necessary correction
factors. With these factors accounted for, you should be ready to choose the best
ring height for your application. (Please note: Do to shipping costs, we cannot
exchange rings.)
-Does your scope have an adjustable objective?
Adjustable objectives increase the bell diameter. If you have an adjustable objective, add
5mm to your AOD.
-Will you use a lens-cap on the objective lens of this scope?
Objective lens-caps or sunshades also increase your effective diameter. For simple
caps add 3-4mm to you AOD. For flip up caps add 5-6mm, as you'll need clearance to
open the cap.
-Do you have a straight barrel? Most Rifles have
a slight taper between the receiver and barrel. Large objective scopes(44+) may need
to mount higher if your barrel has no taper. Add 5mm to your AOD if your using a
large objective scope with a straight-barrel firearm.
-Do you have Iron-Sights that will interfere with your scope?
Iron-Sights sometimes occupy the space where the scope bell would be, but usually these
sights can be easily removed. If you have iron-sights that would interfere, add
3mm-6mm to your AOD to compensate. (2x interference)
|
|
